Filter
Top Products
8-8 Receiving Faxes Chapter 8
Receiving Faxes Manually: MANUAL MODE
In MANUAL MODE, if you connect the handset, a telephone, or an extension phone to
your unit, you can receive voice calls as well as manually activate reception of faxes.
You can activate reception from your unit or from the telephone or extension phone
connected to the unit (this is called Remote receiving).
n
• For this mode, you need to connect the handset, a telephone, or an extension phone to
your unit. (1 p. 2-5)
• Make sure the REMOTE RX setting is enabled (1 p. 14-7). You can also enable this
setting from the MultiPASS Suite. (1 Software User’s Guide)
Setting MANUAL MODE
Follow this procedure to set the receive mode to MANUAL MODE:
1 Press Receive Mode to select MANUAL
MODE.
• After a few seconds, the LCD changes to this
Ex:
display:
Receiving a Fax Manually
Follow this procedure to receive a fax manually:
1 Make sure Manual is displayed in the LCD.
Ex:
(1 above)
2 Make sure you have connected the
handset, a telephone, or an extension
phone to the unit. (1 p. 2-5)
3 When you hear the handset, telephone, or
extension phone ring, pick up the handset.
15:00 Manual
15:00 Manual
MANUAL MODE