Filter
Top Products
Appendix B Handset B-3
Handset
Attaching the Handset to Your Unit
Follow this procedure to attach the handset to your unit:
1 Use two of the screws provided to attach
the handset cradle to the cradle support.
• Push the screws in with your finger or use a
cross-point screwdriver. Make sure the
screws are inserted all the way in.
2 Before attaching the cradle support to
your unit, remove the BJ cartridge.
• To remove the cartridge follow steps 1 to 5
on pages 12-12 and 12-13.
• Store the BJ cartridge in the BJ cartridge
container provided with your unit.
3 Disconnect the power cord from your unit.
4 Turn the unit on its side and while
supporting it, use a screwdriver to
remove the two covers on the bottom of
the unit.
5 Support the unit and use the remaining
two screws provided to attach the cradle
support to the unit.
• Push the screws in with your finger or use a
cross-point screwdriver. Make sure the
screws are inserted all the way in.
• Make sure you support the unit when
inserting the screws.