Filter
Top Products
Chapter 2 Setting Up 2-3
Setting Up
Removing Shipping Materials
Follow this procedure to remove the shipping materials. Keep them in case you need to
transport the unit in the future:
n
The actual shipping materials may differ in shape, quantity, and position from the ones
shown above.
3
Open the document tray*, then
remove the shipping tapes and
protective sheet.
2
Remove the
protective piece
from the multi-
purpose tray.
1
Remove the
shipping tapes
from the top of
the unit.
5
Open the printer cover, then remove
the shipping tape from the side of the
unit.
Close the printer cover and document
tray.
4
Open the operation panel
partially by gently pulling it
towards you (it only opens
slightly). Then remove the
protective sheet from the ADF.
Close the operation panel by
pressing it down from the
centre until it locks into place.
*For Hong Kong, Singapore, and Malaysia, the unit comes with the document tray already attached.