Filter
Top Products
6-4 Speed Dialling Chapter 6
7 Use the numeric buttons to enter the fax/
Ex:
telephone number you want to register (max.
120 digits, including spaces and pauses).
• To enter a space, press Space. Spaces are
optional and are ignored during dialling.
• To enter a pause, press R (Redial)/Pause.
• To correct a mistake in the number, press l
to delete the rightmost digit.
• To delete an entire entry or to change a
previous entry, press Clear.
• If you have already registered a number and
you only want to change the name, ignore this
step.
• To cancel one-touch speed dialling for the
button you selected, press Clear then Set.
Press Stop to return to standby mode. The
fax/telephone number and name registered
under that button will be deleted.
8 Press Set twice.
Ex:
9 Use the numeric buttons to enter the name
Ex:
that goes with the number (max. 16 characters,
including spaces).
• If you are unsure how to enter characters,
1 p. 3-3.
• If you have already registered a name and
want to keep the same name, ignore this step.
10 Press Set.
Ex:
11 To continue registering other one-touch
speed dialling buttons, repeat the procedure
from step 5.
-or-
Press Stop to return to standby mode.
Ex:
n
You can print the 1-TOUCH SPD DIAL LIST showing all the numbers and names
registered for one-touch speed dialling (1 p. 6-13). Keep this list near your unit so you can
refer to it when dialling.
15:00 FaxOnly
05=
DATA ENTRY OK
Canon EUROPA
:A
_:A
NAME
DATA ENTRY OK
TEL=20 545 8545_