Filter
Top Products
14-6 Summary of Settings Chapter 14
ECM TX
MID PAUSE SET
AUTO REDIAL
REDIAL TIMES
REDIAL INTERVAL
TIME OUT
COLOUR DIRECT TX
Enables/disables Error Correction Mode (ECM) during
transmission.
Selects the length of the pause entered when you press
R (Redial)/Pause.
Enables/disables automatic redialling if the other party’s
line is busy on the first attempt. (1 p. 7-10)
Selects the number of redial attempts.
Selects the period of time between redial attempts.
Enables/disables automatic scanning of documents
after the fax number is entered.
ON: Scanning begins automatically five seconds after
entering the fax number (10 seconds if sending to
multiple destinations).
OFF: Scanning does not start automatically. (You need
to press Start to begin scanning.)
Enables/disables sending of colour documents to fax
machines that do not have colour faxing capability.
OFF: Colour documents cannot be sent to fax machines
that do not support colour faxing.
ON: Colour documents can be sent to fax machines that
do not support colour faxing. (The document is
converted to black & white.)
ON
OFF
2 SEC
(1 to 15)*
ON
OFF
2 TIMES
(1 to 2)**
2 MIN.
(1 to 99)***
ON
OFF
OFF
ON
(Default settings are shown in bold type.)
*Hong Kong: 4 SEC (4 to 11).
**New Zealand: 1 to 5, Hong Kong: 1 to 3, Singapore: 1 to 10, Malaysia: 1 to 15.
***Singapore: 2 to 99.
.
TX (Transmission) Settings Menu
For details on accessing the settings below, 1 pp. 14-2, 14-3.
Setting Description Sub-Settings