Filter
Top Products
100
Customizing System Operation (System Settings)
Specifying Silence or
Operating Tones
> [System settings] > [Beep]
You can select whether a beep
sounds or not when you operate the
projector.
Press the OK button to accept your
setting and then press the MENU
button.
• The factory default is [On].
• The beep will not sound if you mute the
projector sound with the MUTE button on
the remote control.
Specifying Key Repeat
Operation
> [System settings] > [Key repeat]
By pressing and holding the button
on the projector or the remote
control you can operate Key repeat
in the same way as when the button
is pressed repeatedly.
Press the OK button to accept your
setting and then press the MENU
button.
• The factory default is [On].
HDMI Component LAN
Digital PC Analog PC USB
Off Disables the beep.
On Enables the beep.
HDMI Component LAN
Digital PC Analog PC USB
Off
Key repeat is not enabled.
On Key repeat is enabled.
Downloaded From projector-manual.com Canon Manuals