Filter
Top Products
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen
52
4 Use the [ ] / [ ] buttons to move the image.
5 When the image fits the screen, press the OK button.
Resetting the Image Shift
Perform the following steps to reset the image shift adjustment. Access the
[D. image shift adjustment] window and press the D.SHIFT/KEYSTONE button to
display the [D. image shift reset] window. Next, select [OK] with the [ ] button, and
then press the OK button.
Select the Aspect
Select [Aspect] based on the input signal type, aspect ratio of the screen and
resolution. For more details about aspect ratios, refer to “Relationship between Aspect
and Screen Aspect” on page 209.
Types of Aspect Ratios
Auto
An image is projected at the aspect ratio of the input signal. Select this mode for
normal image projection.
16:10
The image is projected using an input signal aspect ratio of 16:10. Select this if an
image of 16:10 aspect ratio cannot be correctly projected in [Auto] mode.
16:9
The image is projected using an input signal aspect ratio of 16:9. Select this if an
image of 16:9 aspect ratio cannot be correctly projected in [Auto] mode.
[] button:
Moves the image right.
[ ] button:
Moves the image left.
Remote control Projector
Screen
Downloaded From projector-manual.com Canon Manuals