Filter
Top Products
109
Customizing System Operation (System Settings)
Operation Setting Functions from Menus
Select [Yes] on the screen for
confirmation and press the OK button
to reset the lamp counter.
Press the MENU button.
■ About the Display of the
Lamp Counter
The lamp counter display is as follows.
Less than 2,700 hours
Displayed as a green bar.
2,700 hours to less than 3,000 hours
Displayed as a green and yellow bar.
When the lamp hours are 2,700 hours
to less than 3,000 hours, the message
“Obtain a new lamp.” appears when
power is turned on.
Over 3,000 hours
Displayed as a green, yellow and red
bar.
The message “Replace with the new
lamp.” appears when power is turned
on.
• The lamp counter provides an
estimate of the time remaining until
the lamp must be replaced. This
value is based on the hours in use
and the present load on the lamp.
• The number of hours indicated is
equivalent to use under these
conditions: [Vertical projection]
(P147) set to [Off], and [Lamp mode]
(P95) set to [Full power].
Downloaded From projector-manual.com Canon Manuals