Filter
Top Products
Installation-Related Menu Settings
147
Installation and Maintenance Installation
Specifying Vertical
Projection
> [Install settings] > [Professional
settings] >
[Vertical projection]
You can ensure adequate cooling by
switching the fan mode to suit
upward- or downward-facing
installations.
For precautions, see “Install Facing
in the Correct Direction” on page
117.
When the setting is completed, press
the OK button to accept your setting
and then press the MENU button.
• [Off] is the factory default.
Saving and Restoring
Lens Positions
> [Install settings] > [Lens - Position]
The projector can save information
about the lens position in memory.
Up to three sets of lens information
(including focus, zoom, and lens
shift settings) can be saved, and the
lens can be restored to these
positions.
If the OK button or [ ] button is
pressed, the [Lens - Position] screen is
displayed.
Select using the [ ] / [ ] buttons.
The following options are available on
the [Lens - Position] screen.
Press the
OK
button to accept your
setting and then press the
MENU
button.
HDMI Component LAN
Digital PC Analog PC USB
Off Does not alter the fan mode.
Upward Setting for use when the
projector faces upward
Downward Setting for use when the
projector faces downward
• Be sure to perform this setting to use
vertical projection.
• Even if you complete this setting,
vertical projection will result in a
shorter useful life of the lamp and
other parts than horizontal
projection.
HDMI Component LAN
Digital PC Analog PC USB
Load position
1–3
Restores the lens to the
positions saved using
Save position 1–3.
Save position
1–3
Saves the lens position as
positions 1–3.
Lens shift
reset
Restores the lens to the
original position.
Downloaded From projector-manual.com Canon Manuals