Filter
Top Products
81
Setting Display Status (Input Settings)
Operation Setting Functions from Menus
• [Film/auto] is the factory default.
• Select [Off] when flickers and horizontal
lines are noticeable in media that has a lot
of fast-moving action.
• Not available during split-screen display.
Specifying the
Slideshow Interval
> [Input settings] > [Slideshow
Interval]
You can project images on a USB
flash drive automatically, one after
another.
Use the [ ] / [ ] buttons to select the
interval for switching images
(min.:sec.).
Press the MENU button.
• The factory default is [--:--], which does not
switch images automatically.
• Can be set in a range of 1 second to 60
minutes.
• Switching the input signal to an option other
than [USB] will stop any slideshow in
progress. To resume the slideshow from the
last image shown, return the input signal to
[USB].
• During slideshows, digital zoom only
applies to the current image.
HDMI Component LAN
Digital PC Analog PC USB
Downloaded From projector-manual.com Canon Manuals