Filter
Top Products
35
Part Names
Before Use
■ LED Indicator Displays
The LED indicators flash or illuminate to indicate the operating status of the
projector.
If WARNING is on or flashing, refer to “LED Indicator Meanings” on page 202.
: Off : Lit : Flashing
LED indicator
Operating status
POWER
ON
(green)
STAND
BY
(red)
WARNING
(red)
LAMP
(orange)
TEMP
(red)
Not plugged in.
In standby mode.
Power is on (projecting).
Transitioning from standby mode to
power on.
Cooling down while transitioning from
power on to standby mode or power
management mode.
In power management mode, with the
lamp off.
Nearly time to replace the lamp (in
standby mode).
Nearly time to replace the lamp (during
projecting).
Internal temperature is high.
A lamp error has occurred.
Power was turned off due to high
internal temperature.
The lamp cover is open.
Another error has occurred.
Downloaded From projector-manual.com Canon Manuals