Filter
Top Products
141
Installation and Maintenance Installation
Installation-Related Menu Settings
Locking Installation
Settings
> [Install settings] > [Positional lock]
Operation of installation related
functions can be prohibited.
Press the OK button to accept your
setting and then press the MENU
button.
• The factory default is [Off].
• Locking applies to the following settings:
- Image flip H/V
- Screen aspect
- Zoom
- Keystone
- Digital image shift
- Professional settings
- Save position or Lens shift reset in Lens -
Position
Flipping Image
Display
> [Install settings] > [Image flip H/V]
Select this setting if you want to
hang the projector from the ceiling
or project an image from behind the
screen.
Press the OK button to accept your
setting and then press the MENU
button.
• [None] is the factory default.
HDMI Component LAN
Digital PC Analog PC USB
Off The positional lock is not used.
On Prevents adjustment of installation-
related functions.
HDMI Component LAN
Digital PC Analog PC USB
None Select this to project an image
normally.
Ceiling
mounted
Select this to project an image
with the projector hung from the
ceiling.
The projected image is inverted
in both vertical and horizontal
directions.
Rear Select this to project an image
from behind the screen.
The projected image is inverted
in the horizontal direction.
Rear,
Ceiling
mounted
Select this to project an image
from behind the screen with the
projector hung from the ceiling.
The projected image is inverted
in the vertical direction.
Downloaded From projector-manual.com Canon Manuals