Filter
Top Products
Installation-Related Menu Settings
154
Projecting from Multiple Projectors at Once
(Edge Blending)
> [Install settings] > [Professional
settings] >
[Edge blending]
Overlapping edges of images from
multiple projectors used together can
be blended to make the overall image
more seamless.
■ Basic Instructions
Follow these steps when using two projectors side by side.
1 In the [Install settings] menu, select [Professional settings] > [Edge
blending].
2 Select [Adjust].
The edge blending window is displayed.
HDMI Component LAN
Digital PC Analog PC USB
• To simplify adjustment, use the same lens shift position and image mode (ideally,
[Photo/sRGB]) on each projector.
• For optimum edge-blending results, perform the following adjustments.
(1) Black level, white level, and color temperature (P88) by adjusting brightness (P86),
contrast (P86), R/G/B gain and offset
(2) Color adjustment by using 6-axis color adjustment (P92)
(3) Gamma adjustment by fine-tuning gamma (P93)
Downloaded From projector-manual.com Canon Manuals