Filter
Top Products
Completing Projector Settings
168
Specifying the
Network Function
> [Network settings] > [Network
function]
You can turn the projector network
function on or off. Power can be
saved by turning the function [Off].
Press the OK button to accept your
setting and then press the MENU
button.
• [Off] is the factory default.
Viewing the IP
Address, Gateway
Address, and MAC
Address
> [Network settings] > [Detailed
settings] >
[IP address]
View the projector’s IP address as
follows.
Note that the information can only be
displayed, not changed.
To change the settings, access the
DHCP or TCP/IP settings.
> [Network settings] > [Detailed
settings] >
[Gateway address]
View the projector’s gateway
address as follows.
Note that the information can only be
displayed, not changed.
> [Network settings] > [Detailed
settings] >
[MAC address]
Off Disables the network function.
On Enables the network function.
Downloaded From projector-manual.com Canon Manuals