Filter
Top Products
Completing Projector Settings
171
Installation and Maintenance Connecting to a Network
Specifying AMX
Device Discovery
> [Network settings] > [AMX Device
Discovery]
In a network environment, AMX
Device Discovery can be used to
enable other equipment to discover
the projector. For networks without
AMX Device Discovery, select [Off].
• [Off] is the factory default.
What is PJLink?
In September 2003, the PJLink
Working Group was established
under the Data Projector Committee.
During the first year, this PJLink
Working Group standardized PJLink
as a new interface specification for
projectors.
PJLink is a unified standard for
operation and control of projectors.
It allows centralized control of
projectors and operation from a
controller for all projectors
regardless of manufacturer.
The objective is for JBMIA to
improve convenience for users and
expand the use of projectors through
early systemization for network
monitoring and control of projectors,
which will become the mainstream in
the future.
Class 1: Standardization of control
and monitoring specifications for
basic projector functions
Basic projector control: Power
control, input selection, etc.
Acquisition of projector information
and status: Power status, input
selection status, error status, lamp
use time, etc.
JBMIA: Japan Business Machine
and Information System
Industries Association.
The JBMIA is an
organization which was
launched in 1960 and
changed its name on April
1, 2002.
PJLink website:
http://pjlink.jbmia.or.jp/
english/
PJLink is a registered trademark of JBMIA
and pending trademark in some countries.
Off Disables AMX Device Discovery.
On Enables AMX Device Discovery. The
projector will periodically send out
AMX beacon packets over the
network.
For details on AMX Device Discovery,
visit the AMX website.
http://www.amx.com/
Downloaded From projector-manual.com Canon Manuals