Filter
Top Products
108
Customizing System Operation (System Settings)
Specifying HDMI Input
> [System settings] > [HDMI In]
Set the type of equipment which is
connected to the HDMI port. Note
that to some extent, the [HDMI In]
setting determines which image
modes are available. (P57)
Press the OK button to accept your
setting and then press the MENU
button.
• [Auto] is the factory default.
Resetting the Lamp
Counter
> [System settings] > [Other settings] >
[Lamp counter]
You can reset the lamp counter that
indicates the time for lamp
replacement.
Select [Lamp counter] and press the
OK button to display the lamp counter.
Select [Reset] and press the OK button.
HDMI Component LAN
Digital PC Analog PC USB
Auto Select when AV equipment will
be connected. Image
processing, menu displays,
and other elements are
adjusted for video equipment.
Computer Select when a computer will be
connected. Image processing,
menu displays, and other
elements are adjusted for a
computer.
HDMI Component LAN
Digital PC Analog PC USB
Do not reset the lamp counter
except when you have replaced
the lamp. Otherwise, the lamp
counter cannot indicate the
correct timing for replacing the
lamp.
For details of lamp replacement, refer
to page 197.
Downloaded From projector-manual.com Canon Manuals