Filter
Top Products
91
Adjusting Image Quality (Image Adjustment)
Operation Setting Functions from Menus
Reducing Image
Noise
(Mosquito noise reduction)
> [Image adjustment] > [Advanced
adjustment] >
[Mosquito noise
reduction]
You can reduce mosquito noise.
Press the OK button to accept your
setting and then press the MENU
button.
• [Off] is the factory default.
• Image resolution may seem lower when
noise reduction is applied.
• The adjustment you have made is stored as
adjusted values for the input signals and
image mode of the current projection.
• This setting is not displayed for the
following input: HDMI, Digital PC, Analog
PC-1, Analog PC-2, or Component.
Dynamic Gamma
Adjustment
> [Image adjustment] > [Advanced
adjustment] >
[Dynamic gamma]
You can adjust the gradation
representation of light and dark
portions of an image automatically.
Press the OK button to accept your
setting and then press the MENU
button.
• The factory default settings are as follows.
- For HDMI (when [HDMI In] (P108) is
[Computer]), Digital PC or Analog PC,
USB, or LAN, the factory default is [Off].
- For HDMI (when [HDMI In] (P108) is set
to [Auto]) and Component, the default
setting is [Weak].
• The adjustments you have made are stored
as adjusted values for the input signals and
image mode of the current projection.
HDMI Component LAN
Digital PC Analog PC USB
Off Disables mosquito noise
reduction.
Weak
Middle
Strong
Specifies the intensity of the
mosquito noise reduction in three
steps.
HDMI Component LAN
Digital PC Analog PC USB
Off Dynamic gamma is disabled.
Weak
Middle
Strong
Specifies the intensity of the
dynamic gamma in three steps.
Downloaded From projector-manual.com Canon Manuals