Filter
Top Products
183
Completing Computer Settings
Installation and Maintenance Connecting to a Network
Setting Up Email [Mail]
From [Mail] in the settings screen, you can set the items necessary to send error
mails and test mails. For the setting procedure, refer to “Network Setting” (P179).
* If you set 0 seconds, the mail will be sent repeatedly with no intervals.
Item Explanation Factory default setting
To:
Enter the recipient address for
error mails in 1-byte
alphanumeric characters and
symbols (1 - 63 characters).
MailUserAccount
Cc:
Enter the CC address for error
mails in 1-byte alphanumeric
characters and symbols (1 - 63
characters).
<Blank>
From:
Enter the sender address for
error mails in 1-byte
alphanumeric characters and
symbols (1 - 63 characters).
Projector@canon.co.jp
SMTP server IP address Enter the SMTP server IP
address in 1-byte numbers.
0.0.0.0
SMTP server port number
Enter the SMTP server port
number in 1-byte numbers (1 -
65535).
25
SNTP server IP address Enter the SNTP server IP
address in 1-byte numbers.
0.0.0.0
Time zone Select the time zone where
the projector is used.
(GMT) Dublin, Lisbon,
London
Mail resend interval* Enter the interval for
resending mail when an error
occurred (units: seconds)
within the range of 0 - 59
seconds using 1-byte
numbers.
10
Mail resend times Enter the number of times to
resend mail when an error
occurred within the range of 0
- 255 using 1-byte numbers.
3
Error report Select whether to turn the
error mail sending function on
or off.
OFF
Downloaded From projector-manual.com Canon Manuals