Filter
Top Products
106
Customizing System Operation (System Settings)
Selecting Audio Input
> [System settings] > [Other settings] >
[Audio in terminal select]
You can select the audio input
terminal to use for each type of input
signal.
Press the OK button to accept your
setting and then press the MENU
button.
• The factory defaults are as follows.
[HDMI]: HDMI
[Audio in 1]:
Digital PC, Analog PC-1, USB
[Audio in 2]:
Analog PC-2, Component
[LAN]: LAN
HDMI Component LAN
Digital PC Analog PC USB
Off No audio is output.
Audio in 1 Use audio signals from AUDIO
IN 1 for audio output.
Audio in 2 Use audio signals from AUDIO
IN 2 for audio output.
HDMI Use HDMI audio signals for
audio output. (Only for HDMI.)
LAN Use LAN audio signals for
audio output. (Only for LAN.)
Audio is transferred by the
NMPJ application.
Downloaded From projector-manual.com Canon Manuals