Filter
Top Products
Installation-Related Menu Settings
151
Installation and Maintenance Installation
Specifying the Menu
Display Time
> [Install settings] > [On screen] >
[Menu display time]
The setting for the menu display time
can be extended from the normal 10
or 30 seconds to 3 minutes.
Press the
OK
button to accept your
setting and then press the
MENU
button.
• [Normal] is the factory default.
• The following display times are also changed.
Showing/Hiding Lamp
Replacement
Warnings
> [Install settings] > [On screen] >
[Lamp warning display]
A message that advises you to
change the lamp can be set to
display when the lamp has been
used for the specified period of time.
Press the OK button to accept your
setting and then press the MENU
button.
• The factory default is [On].
HDMI Component LAN
Digital PC Analog PC USB
Normal The menu is displayed for 10
or 30 seconds.
Extended The menu is displayed for 3
minutes.
Item [Normal]
[Extended]
-MENU screen
30
seconds
3
minutes
-Input (P40)
-Keystone adjustment
(P54)
-Keystone reset (P56)
-
Focus adjustment
(P44)
-Zoom adjustment (P45
)
-Lens shift adjustment
(P46
)
-Lens shift reset (P147
)
-D.image shift
adjustment (P50, P51)
-D.image shift reset
(P52)
-Aspect (P53)
-Image Mode (P57)
-Volume adjustment
(P63)
-Gamma correction
(P87)
10
seconds
3
minutes
HDMI Component LAN
Digital PC Analog PC USB
Off The prepare lamp message and the
lamp warning are not displayed.
On The prepare lamp message and the
lamp warning are displayed.
When it is time to replace the lamp, the
LAMP indicator on the projector will
flash, and lamp replacement (P199) is
recommended at this time.
Downloaded From projector-manual.com Canon Manuals