Filter
Top Products
44-27
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 44 Configuring Digital Certificates
Managing the User Database
What to Do Next
See the “Managing the User Database” section on page 44-27.
Managing the User Database
The local CA user database includes user identification information and user status (enrolled, allowed,
revoked, and so on). In the Manage User Database pane, you can perform the following tasks:
• Add a user to the local CA database.
• Change existing user identification information.
• Remove a user from the local CA database.
• Enroll a user.
• Update CRLs.
• E-mail OTPs to a user.
• View or regenerate (replace) an OTP.
This section includes the following topics:
• Adding a Local CA User, page 44-27
• Sending an Initial OTP or Replacing OTPs, page 44-28
• Editing a Local CA User, page 44-28
• Deleting a Local CA User, page 44-29
• Allowing User Enrollment, page 44-29
• Viewing or Regenerating an OTP, page 44-29
Adding a Local CA User
To add a local CA user, perform the following steps:
Step 1 To enter a new user into the local CA database, click Add to display the Add User dialog box.
Step 2 Enter a valid username.
Step 3 Enter an existing valid e-mail address.
Step 4 Enter the subject (DN string). Alternatively, click Select to display the Certificate Subject DN dialog
box.
Step 5 Choose one or more DN attributes that you want to add from the drop-down list, enter a value, and then
click Add. Available X.500 attributes for the Certificate Subject DN are the following:
• Common Name (CN)
• Department (OU)
• Company Name (O)
• Country (C)
• State/Province (ST)
• Location (L)