Filter
Top Products
Contents
xxviii
Cisco ASA 5500 Series Configuration Guide using ASDM
Configuring NAT Control 35-15
Using Dynamic NAT 35-16
Dynamic NAT Implementation 35-16
Real Addresses and Global Pools Paired Using a Pool ID 35-17
NAT Rules on Different Interfaces with the Same Global Pools 35-17
Global Pools on Different Interfaces with the Same Pool ID 35-18
Multiple NAT Rules with Different Global Pools on the Same Interface 35-18
Multiple Addresses in the Same Global Pool 35-19
Outside NAT 35-20
Real Addresses in a NAT Rule Must be Translated on All Lower or Same Security
Interfaces
35-21
Managing Global Pools 35-21
Configuring Dynamic NAT, PAT, or Identity NAT 35-22
Configuring Dynamic Policy NAT or PAT 35-24
Using Static NAT 35-26
Configuring Static NAT, PAT, or Identity NAT 35-27
Configuring Static Policy NAT, PAT, or Identity NAT 35-30
Using NAT Exemption 35-32
PART
10 Configuring Service Policies
CHAPTER
36 Configuring a Service Policy 36-1
Information About Service Policies 36-1
Supported Features for Through Traffic 36-1
Supported Features for Management Traffic 36-2
Feature Directionality 36-2
Feature Matching Within a Service Policy 36-3
Order in Which Multiple Feature Actions are Applied 36-4
Incompatibility of Certain Feature Actions 36-5
Feature Matching for Multiple Service Policies 36-5
Licensing Requirements for Service Policies 36-5
Guidelines and Limitations 36-6
Default Settings 36-6
Default Configuration 36-7
Default Traffic Classes 36-7
Task Flows for Configuring Service Policies 36-8
Task Flow for Configuring a Service Policy Rule 36-8
Adding a Service Policy Rule for Through Traffic 36-8