Filter
Top Products
74-4
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 74 Monitoring VPN
VPN Statistics
–
Assigned IP Address/Public IP Address—Shows the private (“assigned”) IP address assigned to
the remote client for this session. This is also known as the “inner” or “virtual” IP address, and
it lets the client appear to be a host on the private network. Also shows the Public IP address of
the client for this remote-access session. This is also known as the “outer” IP address. It is
typically assigned to the client by the ISP, and it lets the client function as a host on the public
network.
Note The Assigned IP Address field does not apply to Clientless SSL VPN sessions, as the ASA
(proxy) is the source of all traffic . For a hardward client session in Network Extension mode,
the Assigned IP address is the subnet of the hardware client's private/inside network interface.
–
Protocol/Encryption—Shows the protocol and the data encryption algorithm this session is using,
if any.
–
Login Time/Duration—Shows the date and time (MMM DD HH:MM:SS) that the session
logged in. and the length of the session. Time is displayed in 24-hour notation.
–
Client (Peer) Type/Version—Shows the type and software version number (for example, rel.
7.0_int 50) for connected clients, sorted by username.
–
Bytes Tx/Bytes Rx—Shows the total number of bytes transmitted to/received from the remote
peer or client by the ASA.
• IPsec Site-to-Site—Indicates that the values in this table relate to LAN-to-LAN traffic.
–
Connection Profile/IP Address—Shows the name of the tunnel group and the IP address of the
peer.
–
Protocol/Encryption—Shows the protocol and the data encryption algorithm this session is using,
if any.
–
Login Time/Duration—Shows the date and time (MMM DD HH:MM:SS) that the session
logged in. and the length of the session. Time is displayed in 24-hour notation.
–
Bytes Tx/Bytes Rx—Shows the total number of bytes transmitted to/received from the remote
peer or client by the ASA.
• Clientless SSL VPN—Indicates that the values in this table relate to Clientless SSL VPN traffic.
–
Username/IP Address—Shows the username or login name for the session and the IP address of
the client.
–
Group Policy Connection Profile—Displays the connection profile of the tunnel group policy.
–
Protocol/Encryption—Shows the protocol and the data encryption algorithm this session is using,
if any.
–
Login Time/Duration—Shows the date and time (MMM DD HH:MM:SS) that the session
logged in. and the length of the session. Time is displayed in 24-hour notation.
–
Bytes Tx/Bytes Rx—Shows the total number of bytes transmitted to/received from the remote
peer or client by the ASA.
• SSL VPN Client—Indicates that the values in this table relate to traffic for SSL VPN Client sessions.
–
Username/IP Address—Shows the username or login name for the session and the IP address of
the client.
–
Group Policy Connection Profile—Displays the connection profile of the tunnel group policy.
–
Protocol/Encryption—Shows the protocol and the data encryption algorithm this session is using,
if any.