Filter
Top Products
7-4
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-02
Chapter 7 Removing and Replacing FRUs from the Cisco ASR 1001-X Router
Removing and Replacing the Cisco ASR 1001-X Router Power Supplies
Figure 7-3 Cisco ASR 1001-X Router AC Power Supply Standby Switch
Step 2
Insert the power supply module into the appropriate slot(s), making sure that the retention latch is firmly
placed. You can verify that the power supply module is firmly latched by gently pulling the power supply
handle.
Step 3 Insert the power supply cables firmly into the power supplies.
Note Ensure that both power supplies are inserted firmly and the power cords are in place.
Step 4 Ensure that the AC power cords are positioned, as shown in Figure 7-4.
Figure 7-4 Correct Position of the Cisco ASR 1001-X Router AC Power Supply Cables
1 Cisco ASR 1001-X Router Standby switch, which does not disconnect power from the power
source.
371086
1
371087
1
2
1
2