Filter
Top Products
3-4
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-02
Chapter 3 Preparing Your Site for Installation
Cautions and Regulatory Compliance Statements for NEBS
Note The English warnings in this document are followed by a statement number. To see the translations of a
warning in other languages, look up its statement number in Regulatory, Compliance, and Safety
Information for the Cisco Aggregation Services Router 1000 Series.
Cautions and Regulatory Compliance Statements for NEBS
The following table lists cautions, regulatory compliance statements, and requirements for the Network
Equipment-Building System (NEBS) certification from the Telcordia Electromagnetic Compatibility
and Electrical Safety – Generic Criteria for Network Telecommunications Equipment (A Module of
LSSGR, FR-64; TSGR, FR-440; and NEBSFR, FR-2063) Telcordia Technologies Generic
Requirements, GR-1089-CORE.
Table 3-1 Compliance Requirements
EMC/Safety Compliance and NEBS Requirements
Specification Description
EMC/Safety
Caution Shielded twisted pair T1/E1 cables must be used with the 8-port channelized T1/E1
SPA interfaces in any Cisco ASR 1000 chassis. This is required for compliance with
Class A emission requirements for EMC.
Caution Shielded twisted pair T1/E1 cables must be used with any of the T1/E1 NIM interfaces
in any Cisco ASR 1000 chassis. This is required for compliance with Class A emission
requirements for EMC.
Telcordia NEBS
GR-1089-Core Statement
Caution To comply with the Telcordia GR-1089 NEBS standard for electromagnetic
compatibility and safety, for Ethernet RJ-45 ports, use only shielded Ethernet cables
that are grounded on both ends. In a NEBS installation, all Ethernet ports are limited
to intrabuilding wiring.
Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface.
Caution To comply with the Telcordia GR-1089 NEBS standard for
electromagnetic compatibility and safety, for Ethernet RJ-45 ports, use
only shielded Ethernet cables that are grounded on both ends. In a NEBS
installation, all Ethernet ports are limited to intrabuilding wiring.