Filter
Top Products
4-11
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-02
Chapter 4 Cisco ASR 1001-X Router Installation
Attaching a Chassis Ground Connection
Figure 4-6 shows how to attach the ground lugs on the Cisco ASR 1001-X Router.
Figure 4-6 Installing a Ground Connection on the Cisco ASR 1001-X Router
Use the following procedure to attach the grounding lug to the chassis ground connector on your chassis:
Step 1 Use the wire stripper to strip one end of the AWG #6 wire approximately 0.75 inches (19.05 mm).
Step 2 Insert the AWG #6 wire into the open end of the grounding lug.
Step 3 Use the crimping tool to carefully crimp the wire receptacle around the wire. This step is required to
ensure a proper mechanical connection.
Step 4 Attach the grounding lug with the wire so that the grounding wire does not overlap the power supply.
Figure 4-7 shows how to attach a grounding lug to the chassis ground connector.
371085
1
2
3
4
2
1 Chassis ground studs and lead wire 3 Ground connector on the chassis
2 Grounding screws 4 Ground symbol