Filter
Top Products
2-5
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-02
Chapter 2 Cisco ASR 1001-X Router Supported Hardware Components
Cisco ASR 1001-X Router Power Supplies
NIM-T1/E1
Table 2-6 lists the supported T1/E1 NIMs on the Cisco ASR 1001-X Router:
Cisco ASR 1001-X Router Power Supplies
The Cisco ASR 1001-X Router supports AC and DC power supply options. The modular chassis
configurations support the installation of two power supplies for redundancy. When an external power
supply fails or is removed, the other power supply provides power requirements for the chassis. This
allows you to hot-swap the power supply without impacting the functionality of the router.
Power Supplies for the Cisco ASR 1001-X Router
Each Cisco ASR 1001-X Router power supply provides 250 W of output power. The power supplies are
used in a 1 + 1 redundant configuration. There is no input switch on the faceplate of the power supplies.
A power supply is switched from Standby to On by way of a system chassis STANDBY/ON switch.
When facing the rear of the chassis, power supply slot 0 (PS0) is to the left (next to the power supply
standby switch) and power supply slot 1(PS1) is to the right.
The Cisco ASR 1001-X Router supports the following power supplies:
• Cisco ASR 1001-X Router AC power supply—Provides 250 W output power with DC voltage
output of +12 V. The AC power supply operates between +85 and +264 VAC. The AC power supply
current shares on the 12 V output and is used in a dual hot pluggable configuration.
• Cisco ASR 1001-X Router DC power supply—Provides 242 W output power with DC voltage
output of +12 V. The power supply operates between –40 and –72 VDC. The DC power supply
current shares on the 12 V output and is used in a dual hot-pluggable configuration.
Note The Cisco ASR 1001-X Router can support two AC or two DC power supplies. Do not install mixed AC
and DC power supply units in the same chassis.
Figure 2-1 shows both the DC and AC power supplies for the Cisco ASR 1001-X Router.
Table 2-6 Supported NIM-T1/E1s
Part Number
Number of
Ports
Clear-Channel
Data
MFT Packet
Voice
Unstructured
E1 (G.703)
Support
Channelized
Data
NIM-1MFT-T1/E1 1 Yes No No No
NIM-2MFT-T1/E1 2 Yes No No No
NIM-4MFT-T1/E1 4 Yes No No No
NIM-8MFT-T1/E1 8 Yes No No No
NIM-1CE1T1-PRI 1 Yes No Yes Yes
NIM-2CE1T1-PRI 2 Yes No Yes Yes
NIM-8CE1T1-PRI 8 Yes No Yes Yes