Filter
Top Products
2-8
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-02
Chapter 2 Cisco ASR 1001-X Router Supported Hardware Components
Cisco ASR 1001-X Router Power Supplies
AC/DC Power System Input Range and Voltage for the Cisco ASR 1001-X Router
The power supply DC Input Range is –40 to –72 VDC, and the AC Input Range is +85 to +264 VAC.
Table 2-7 describes the Cisco ASR 1001-X Router power supply LEDs.
Power Cords Supported by the Cisco ASR 1001-X Router
Table 2-8 lists the power cords that are supported by the Cisco ASR 1001-X Router.
Table 2-7 Cisco ASR 1001-X Router—AC and DC Power Supply LEDs
LED Color and State Description
OK - (Solid green) Input power is on and within the normal operating range. On the
AC unit, the LED is solid green when the system in powered on.
When the system is powered off, the LED will blink until the
AC power is removed.
OK - (Blinking Green at the rate of
one blink per second)
Input power that is within the normal operating range is being
supplied, but the Standby switch is in the Standby position (and
not in the On position).
Fail - (Red) Power output has failed.
Off Power supply is shut down.
Table 2-8 Power Cords Supported by the Cisco ASR 1001-X Router
Power Cord Item Number Description
CAB-AC Power Cord, 110 V
CAB-ACA Plug Power Cord, Australia, 10 A
CAB-ACC Power Cord, China
CAB-ACE AC Power Cord, Europe, C13, CEE 7, 1.5 M
CAB-ACI AC Power Cord, Italy, C13, CEI 23-16, 2.5 m
CAB-ACR AC Power Cord, Argentina, C13, EL 219 (IRAM 2073),
2.5m
CAB-ACS AC Power Cord, Switzerland, C13, IEC 60884-1, 2.5 m
CAB-ACU AC Power Cord, UK, C13, BS 1363, 2.5 m
CAB-IND AC Power Cord, India
CAB-JPN AC Power Cord, Japan, C13, JIS C 8303, 2.5 m
CAB-L620P-C13-US Power Cord, 250 VAC, 15A, NEMA L6-20 to C13,
U.S.
CAB-L620P-C13-JPN Power Cord, 250 VAC, 15A, NEMA L6-20 to C13,
Japan
CAB-C13-CBN Cabinet
Jumper
Power Cord, 250 VAC 10 A, C14-C13 Connectors