Filter
Top Products
2-3
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-02
Chapter 2 Cisco ASR 1001-X Router Supported Hardware Components
Supported Small Form-Factor Pluggable (SFP and SFP+) Transceivers
Supported Small Form-Factor Pluggable (SFP and SFP+)
Transceivers
Table 2-3 and Table 2-4 list the supported SFP optics and SFP copper interfaces on the Cisco ASR
1001-X Router.
SPA-4XOC3-POS-V2 4-port OC-3/STM-1 POS
SPA-2X1GE-SYNCE
1
Cisco Synchronous Ethernet SPA
SPA-8XT3/E3 Cisco 8-Port Clear Channel T3/E3 Shared Port
Adapter
SPA-24CHT1-CE-ATM Cisco 24 Port T1/E1/J1 Circuit Emulation SPA
SPA-1CHSTM1/OC3V2 1-Port Channelized OC-3/STM-1 SPA, Version 2
SPA-1XOC12-POS-V2 1-Port OC-12C/STM-4 Multirate POS SPA
(license)
SPA-2XOC3-POS-V2 2-Port OC-3C/STM-1 POS SPA (license)
SPA-2XCT3/DS0-V2 2-Port Channelized T3 SPA, Version 2
SPA-4XCT3/DS0-V2 4-Port Channelized T3 SPA, Version 2
SPA-2XT3/E3-V2 2-Port Clear Channel T3/E3 SPA, Version 2
SPA-4XT3/E3-V2 4-Port Clear Channel T3/E3 SPA, Version 2
SPA-8XCHT1/E1-V2 8-Port Channelized T1/E1 SPA, Version 2
1. There is a limitation for clock switchover scenarios between the Cisco ASR 1001-X Router's built-in ports and the
SPA-2X1GE-SYNCE. All the other functionalities on the SPA-2X1GE-SYNCE are supported.
Table 2-2 Supported Half-Height SPAs (continued)
PID Description
Table 2-3 Supported 1 GE SFP Optics and SFP Copper Interfaces
PID Description
SFP-GE-S 1000BASE-SX SFP (DOM)
GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF,
850nm, DOM
SFP-GE-L 1000BASE-LX/LH SFP (DOM)
GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module,
MMF/SMF, 1310nm, DOM
SFP-GE-Z 1000BASE-ZX Gigabit Ethernet SFP (DOM)
SFP-GE-T 1000BASE-T SFP (NEBS 3 ESD)
GLC-BX-U 1000BASE-BX SFP, 1310NM
GLC-BX-D 1000BASE-BX SFP, 1490NM
GLC-TE 1000BASE-T SFP transceiver module for
category 5 copper wire
GLC-SX-MM GE SFP, LC connector SX transceiver