Filter
Top Products
155Fax
You can change your fax forwarding number from another touch-tone telephone or fax machine.
Set a Remote Access Code
Related Models:Dell E515dn / Dell E515dw
Set a Remote Access Code to access and control your Dell machine even when you are away from it.
Before you can use the remote access and retrieval features, you must set up your own code. The factory default code
is the inactive code (---*).
1. Press Menu.
2. Press p or q to display the Fax option, and then press OK.
3. Press p or q to display the Remote Fax Opt option, and then press OK.
4. Press p or q to display the Remote Access option, and then press OK.
5. Enter a three-digit code using the numbers 0 to 9, * or # using the dial pad, and then press OK.
NOTE: To make your code inactive, press Clear to delete the three-digit code in this step. Then press OK.
NOTE: You cannot change the preset *.
NOTE: DO NOT use the same code used for your Fax Receive Code (*51) or Telephone Answer Code (#51) .
6. Press Cancel.
Use Your Remote Access Code
Related Models:Dell E515dn / Dell E515dw
1. Dial your fax number from a telephone or another fax machine using touch tone.
2. When your machine answers, immediately enter your Remote Access Code (three digits followed by *).
3. The machine signals if it has received messages:
• One long beep -- Fax messages
• No beeps -- No messages
4. When the machine gives two short beeps, enter a command.
• The machine will hang up if you wait longer than 30 seconds to enter a command.
• The machine will beep three times if you enter an invalid command.
5. Press 9 0 to reset the machine when you are finished.
6. Hang up.
• If your machine is set to Manual mode and you want to use the remote retrieval features, wait for about 100
seconds after it starts ringing, and then enter the remote access code within 30 seconds.
• This function may not be available in some countries or supported by your local telephone company.
Remote Retrieval Commands
Related Models:Dell E515dn / Dell E515dw
Use the Remote Commands in this table to access fax commands and options when you are away from your Dell