Filter
Top Products
228 Network
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the General tab.
5. Click Date&Time in the left navigation bar.
NOTE: Select the time difference between your location and UTC from the Time Zone drop-down list. For
example, the time zone for Eastern Time in the USA and Canada is UTC-05:00.
6. Verify the Time Zone settings.
7. Select the Synchronize with SNTP server check box.
8. Click Submit.
Configure the SNTP Protocol Using Web Based Management
Configure the SNTP protocol to synchronize the time the machine uses for authentication with the time kept by
the SNTP time server.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's
IP address).
For example: http://192.168.1.2
3. No password is required by default. Type a password if you have set one, and then click
.
4. Click the Network tab.
5. Click Protocol in the left navigation bar.
6. Select the SNTP check box to activate the settings.
7. Next to the SNTP check box, click Advanced Setting and follow the instructions below: