Dell E515DN All in One Printer User Manual


 
345Machine Settings
WLAN TCP/IP Boot Method
Select the BOOT method that best suits your needs.
IP Address
Enter the IP address.
Subnet Mask
Enter the Subnet mask.
Gateway
Enter the Gateway address.
Node Name
Enter the Node name.
(Up to 32 characters)
WINS Cong
Select the WINS configuration mode.
WINS Server
Specify the IP address of the primary or secondary WINS
server.
DNS Server
Specify the IP address of the primary or secondary DNS
server.
APIPA
Set the machine to automatically allocate the IP address from
the link-local address range.
IPv6
Turn the IPv6 protocol on or off.
WLAN Assistant -
Configure your wireless network settings using the Dell CD-
ROM.
Setup Wizard -
Configure your internal print server manually.
WPS/AOSS -
Configure your wireless network settings using the one-
button push method.
WPS w/PIN Code -
Configure your wireless network settings using WPS with a
PIN.
WLAN Status
View the current wireless network status.
Signal
View the current wireless network signal strength.
SSID
View the current SSID.
Comm. Mode
View the current Communication Mode.
MAC Address -
View the MAC address of the machine.
Set to Default -
Restore the wireless network setting to the factory setting.
WLAN Enable -
Turn the WLAN on or off manually.
Wi-Fi
Direct
Push Button -
Configure your Wi-Fi Direct™ network settings using the
one-button push method.
PIN Code -
Configure your Wi-Fi Direct™ network settings using WPS
with a PIN code.
Manual -
Configure your Wi-Fi Direct™ network settings manually.
Group Owner -
Set your machine as the Group Owner.
Device Info. Device Name
View the device name of your machine.
SSID
View the SSID of the Group Owner.
When the machine is not connected, LCD displays Not
Connected.
IP Address
View the current IP Address of your machine.
Status Info. Status
View the current Wi-Fi Direct™ network status.
Signal
View the current Wi-Fi Direct™ network signal strength.
When your machine acts as Group Owner, the LCD always
indicate a strong signal.
I/F Enable -
Turn the Wi-Fi Direct™ connection on or off.
Network
Reset
- -
Restore all network settings back to the factory settings.