Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 6.0)
287
Upgrading the Firmware to Version 1.5.1
Step Procedure
1 Prepare the Printer.
a. Select Menu from the LCD Control Panel.
b. Scroll down to the Upgrade Printer and hit Select.
c. Select Yes when asked to continue with the Upgrade.
2
Install the Firmware Updater Program. (Note: Ignore this step if the program is
already installed on PC.)
a. Locate the Software Installation CD packaged with the Printer.
b. Insert the CD into the Computer's CD drive.
c. If the CD begins auto-play sequence, select Exit using the on-screen Menu.
d. Select the Run command from Window's Start Menu.
e. Click on the Browse button.
f. Select Setup.exe from the \Utilities\Firmware Updater\ directory on the CD.
g. Once selected, click on OK to run the set-up program.
h. Follow the on-screen instructions to install the Updater utility.
Continued on the next page