Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 6.0)
35
Reviewing the Cancel button
Component Description Cross Reference
Cancel
Button
The Cancel button serves to cancel the
current lamination job and reset the Card
Lamination Module for the next lamination
job.
If a card is left within the lamination
module after a print job is canceled, it will
automatically be ejected into the
Rejection Card Hopper. (Note: With the
Lamination Module's Transfer Station
open, this button can also be used to
manually rotate the Feed Rollers
forward. This is helpful when cleaning
the Rollers or if clearing jammed media.)
If you are printing and laminating
simultaneously and you would like to
cancel both the print and lamination jobs,
press the Printer's CANCEL softkey
button. (Note: This will cancel all jobs in
the Printer. Any card currently laminating
will finish and eject. The lamination
module's Cancel button cancels only the
lamination job.)
See the Section 3: Card
Lamination Module on
page 114.
Continued on the next page