Filter
Top Products
Universal Serial Bus, OTG Capable Controller
MCF52211 ColdFire® Integrated Microcontroller Reference Manual, Rev. 2
Freescale Semiconductor 15-23
15.4.1.15 Address Register (ADDR)
The Address Register holds the unique USB address that the USB Module decodes when in Peripheral
mode (HOST_MODE_EN=0). When operating in Host mode (HOST_MODE_EN=1) the USB Module
transmits this address with a TOKEN packet. This enables the USB Module to uniquely address an USB
peripheral. In either mode, the USB_EN bit within the control register must be set. The Address Register
is reset to 0x00 after the reset input becomes active or the USB Module decodes a USB reset signal. This
action initializes the Address Register to decode address 0x00 as required by the USB specification.
Figure 15-21 shows the ADDR register.
IPSBAR
Offset: 0x1C_0098 (ADDR) Access: User read/write
76543210
R
LS_EN ADDR
W
Reset:00000000
Figure 15-21. ADDR Register
Table 15-25. ADDR Field Descriptions
Field Description
7
LS_EN
Low Speed Enable bit. This bit informs the USB Module that the next token command written to the token
register must be performed at low speed. This enables the USB Module to perform the necessary preamble
required for low-speed data transmissions.
6–0
ADDR
USB address. This 7-bit value defines the USB address that the USB Module decodes in peripheral mode, or
transmit when in host mode.