Filter
Top Products
Interface Access and System Information
Interface Access: Console/Serial Link, Web, and Inbound Telnet
3. Use the arrow keys ([v], [^], [<], [>]) to move to the parameters you want to
change.
Refer to the online help provided with this screen for further information
on configuration options for these features.
4. When you have finished making changes to the above parameters, press
[Enter], then press [S] (for Save).
CLI: Modifying the Interface Access
Interface Access Commands Used in This Section
show console below
[no] telnet-server below
[no] web-management page 7-7
console page 7-8
Listing the Current Console/Serial Link Configuration. This
command lists the current interface access parameter settings.
Syntax: show console
This example shows the switch’s default console/serial configuration.
Interface Access
Enable/Disable
Console Control
Options
Event Log Event
Types To List
Figure 7-2. Listing of Show Console Command
Reconfigure Inbound Telnet Access. In the default configuration,
inbound Telnet access is enabled.
Syntax: [no] telnet-server
7-5