Filter
Top Products
Command Line Interface
121HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
2/8q FC Switch (admin-config) #> config cancel
Configuration mode will be canceled. Please confirm (y/n): [n] y
2/8q FC Switch (admin) #> admin end
The following is an example of how to create a backup file (configdata) and download
the file to the workstation:
2/8q FC Switch #> admin start
2/8q FC Switch (admin) #> config backup
2/8q FC Switch (admin) #> admin end
2/8q FC Switch #> exit
#>ftp symbolic_name or ip_address
user: images
password: images
ftp> bin
ftp> get configdata
ftp> quit
The following is an example of how to upload a configuration backup file (configdata)
from the workstation to the switch, and then restore the configuration:
#> ftp symbolic_name or ip_address
user: images
password: images
ftp> bin
ftp> put configdata
ftp> quit
2/8q FC Switch #> admin start
2/8q FC Switch (admin) #> config restore
The switch will be reset after restoring the configuration.
Please confirm (y/n): [n] y
Alarm Msg: [Tue Jun 10 09:25:56.938 2003][A1005.0021][SM][Configuration
is being restored - this could take several minutes !]
Alarm Msg: [Tue Jun 10 09:26:19.266 2003][A1000.000A][SM][The switch
will be reset in 3 seconds due to a config restore]
2/8q FC Switch (admin) #>
Alarm Msg: [Tue Jun 10 09:26:22.296 2003][A1000.0005][SM][The switch is
being reset]
Good bye.