Filter
Top Products
Command Line Interface
171HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
Uptime command
Displays the elapsed up time since the switch was last reset and reset method. A hot reset or
non-disruptive firmware activation does not reset the elapsed up time reported by this
command.
Authority
None
Syntax
UPTIME
Examples
2/8q FC Switch #> uptime
Elapsed up time : 0 day(s), 2 hour(s), 28 min(s), 44 sec(s)
Reason last reset: NormalReset
User command
Administers and displays user accounts.
Authority
Admin, except for the List option.
Syntax
USER
Keywords
ACCOUNTS
Displays all user accounts that exist on the switch. This keyword is available to all
account names without an Admin session.
ADD
Add a user account to the switch. You will be prompted for an account name, a
password, authority, and an expiration date.
— A switch can have a maximum of 15 user accounts.
— Account names are limited to 15 characters; passwords must be 4–20 characters.
— Admin authority grants permission to use the Admin command to open an admin
session, from which all commands can be entered. Without Admin authority, you
are limited to view-only commands.
— The expiration date is expressed in the number of days until the account expires
(2000 maximum). The switch will issue an expiration alarm every day for seven
days prior to expiration. 0 (zero) specifies that the account has no expiration date.
DELETE [account_name]
Deletes the account name given by [account_name] from the switch.