Filter
Top Products
Command Line Interface
124 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
Examples
2/8q FC Switch (admin) #> firmware install
Warning: Installing new firmware requires a switch reset.
Continuing with this action will terminate all management sessions,
including any Telnet sessions. When the firmware activation is complete,
you may log in to the switch again.
Do you want to continue? [y/n]: y
Press 'q' and the ENTER key to abort this command.
User Account : johndoe
IP Address : 10.20.33.130
Source Filename : 4.0.3.04.00_mpc
About to install image. Do you want to continue? [y/n] y
Connected to 10.20.33.130 (10.20.33.130).
220 localhost.localdomain FTP server (Version wu-2.6.1-18) ready.
331 Password required for johndoe.
Password: xxxxxxxxx
230 User johndoe logged in.
bin
200 Type set to I.
verbose
Verbose mode off.
This may take several seconds...
The switch will now reset.
Connection closed by foreign host.
Hardreset command
Resets the switch and performs a power-on self test. This reset disrupts traffic, activates the
pending firmware, and clears the alarm log. To save the alarm log before resetting, refer to the
“Set Log Command” on page 144.
Authority
Admin
Syntax
HARDRESET
Notes
To reset the switch without a power-on self test, refer to the “Reset command” on
page 131.