Filter
Top Products
Switch Manager
77HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
Restoring the factory default configuration
You can restore the switch and port configuration settings to the factory default values. To
restore the factory configuration on a switch, select Switch > Restore Factory Defaults.
Table 18 lists the factory default switch configuration settings.
Restoring the switch to the factory default configuration does not restore the account name and
password settings. To restore user accounts, select Maintenance > Reset Password File.
Refer to “Recovering a Switch” in the Installation Guide for your switch for information about
maintenance mode and the Maintenance menu.
Table 18: Factory default configuration settings
Setting Value
Symbolic Name 2/8q FC Switch
Administrative State Online
Domain ID 1
Domain ID Lock False
In-band Management True
Broadcast Support Enable
Resource Allocation Timeout (R_A_TOV) 10000 milliseconds
Interop Mode True (not supported)
I/O Stream Guard Disabled
Device Scan Enabled True
Interop Credits 0 (not supported)
Error Detect Timeout (E_D_TOV) 2000 milliseconds
SNMP Enabled True
SNMP Proxy True
IP Address 10.0.0.1
Subnet Mask Address 255.0.0.0
Gateway Address 10.0.0.254
Network Discovery Static
Remote Logging False
Remote Logging Host Ip Address 10.0.0.254
Contact Undefined
Location Undefined
Trap Enabled False
Trap Port 162
Trap Address Trap 1: 10.0.0.254; Traps 2-5: 0.0.0.0
Trap Community Public
Read Community Public
Write Community Private
Port State Online
Port Speed Auto-detect
Port Type GL