Filter
Top Products
Command Line Interface
160 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
The following is an example of the Show Version command:
2/8q FC Switch #> show version
*****************************************************
* *
* Command Line Interface SHell (CLISH) *
* *
*****************************************************
SystemDescription HP StorageWorks
2/8q FC Switch
Eth0NetworkAddress 10.0.0.1 (use 'set setup system' to update)
MACAddress 00:c0:dd:03:cf:cc
WorldWideName 10:00:00:c0:dd:03:cf:cc
ChassisSerialNumber 0346A00032
SymbolicName 2/8q FC Switch
ActiveSWVersion V4.0.0.4-0
ActiveTimestamp Thu Sep 2 18:41:02 2004
DiagnosticsStatus Passed
Show Config command
Displays switch, port, alarm threshold, and zoning for the current configuration.
Authority
None
Syntax
SHOW CONFIG
Keywords
PORT [port_number]
Displays configuration parameters for the port number given by [port_number]. Ports
are numbered beginning with 0. If [port_number] is omitted, all ports are specified.
SWITCH
Displays configuration parameters for the switch.
THRESHOLD
Displays alarm threshold parameters for the switch.
AONING
Displays zoning configuration parameters for the switch.
Examples
The following is an example of the Show Config Port command:
2/8q FC Switch #> show config port 3
Port Number: 3
------------
AdminState Offline