Filter
Top Products
Chapter 3
Installing the System
Performing a Visual Inspection and Completing the Installation
136
Step 4. Reinstall the front EMI panel (Figure 3-55).
Figure 3-55 Front EMI Panel Flange and Cabinet Holes
a. Hook the flange at the lower corners of the EMI panel into the holes on the cabinet.
b. Position the panel at the top lip, and lift the panel up while pushing the bottom into position.
You might need to compress the EMI gasket to seat the panel properly.
c. Reattach the screw at the top of the EMI panel.
Step 5. Check that the cables inside the rear enclosure are secure.
Step 6. Reinstall the back EMI panel (Figure 3-56 on page 137).
Hole
Flange
See detail