Chapter 3
Installing the System
Unpacking and Inspecting the System
90
WARNING Do not attempt to push the loaded cabinet up the ramp onto the pallet. Three people
are required to push the cabinet up the ramp and position it on the pallet. Inspect
the condition of the loading and unloading ramp before use.
Repackaging
To repackage the cabinet, perform the following steps:
Step 1. Assemble the HP packing materials that came with the cabinet.
Step 2. Carefully roll the cabinet up the ramp.
Step 3. Attach the pallet mounting brackets to the pallet and the cabinet.
Step 4. Reattach the ramps to the pallet.
Step 5. Replace the plastic anti-static bag and foam inserts.
Step 6. Replace the cardboard surrounding the cabinet.
Step 7. Replace the cardboard caps.
Step 8. Secure the assembly to the pallet with straps.
The cabinet is now ready for shipment.