Hughes DW4020 Network Hardware User Manual


 
Appendix C • Installing the DW4020 Manually
1031484-0001 Revision 2
97
b. Enter DW4020 in the New field.
c. Select OK. The
Connect To window appears.
d. Select
COM1 from the Connect Using pull-down list (see
Figure 74). (Select
COM2 is you want to use that port.)
e. Select OK. The
COM1 Parameters window appears.
f. Configure the Port Settings by selecting the parameters
below from the appropriate pull-down list (see Figure 75).
Bits per second (baud): 9600
Data bits: 8
Parity: none
Stop bits: 1
Flow control: none
Figure 74: Connect To window