Hughes DW4020 Network Hardware User Manual


 
Appendix C • Installing the DW4020 Manually
78
1031484-0001 Revision 2
The power supply
DW4020 users must use a power supply with the part number
P/N: 1031105-0001. The part number is on a sticker on the power
supply. Verify that you are using the correct power supply. Do not
use anything but the power supply supplied with the DW4020
system (1031105-0001).
Be sure the power supply is labeled ADP 64AB B in the upper
right hand corner of the label, above the bar codes. See Figure 54.
CAUTION
This unit’s performance may suffer if the wrong power
supply is used.
This unit must be used with the power supply PN
1031105-0001.
When power needs to be removed from the receive
modem, ALWAYS unplug the AC power cord from either
the wall outlet, surge protector, or power strip.
NEVER pull the power cord from the back of the receive
modem. Doing so could damage the pins and also
cause a short in the system.
Power supply with the part number 1031105-0001 is to
be used only in the United States and Canada.
This unit must be used with 110-volt AC input.
Other countries may have different standards and
requirements.
Figure 54: PN: 1031105-0001 and ADP-64AB B above bar code
ADP-64AB B
PN: 1031105-0001