Filter
Top Products
Appendix C • Installing the DW4020 Manually
112
1031484-0001 Revision 2
The Final Test Menu
The Final Test Menu is not used by installers. It is used at the
factory to ensure the various DW4020 components are functional.
The menu is shown below.
Other options
This section describes some other options in the Main Menu.
Display active routing table Menu Option (
d) displays the current data in the Active
Routing Table, shown in Figure 89. This data is read-only.
Reset history Menu Option (
h) displays the reset history for the DW4020 as
shown in Figure 90. One of the most recent 8 reset logs may be
displayed. Index 0 is the most recently logged reset.
This data is read-only.
Note that you reset the DW4020 by typing rr at the Main Menu
prompt and pressing Enter. You can force the DW4020 to
download new software keys by typing rd and pressing Enter.
Reading factory information
Option (
g) displays read-only information from the manufacturer.
This option automatically returns to the Final Test menu.
Final Test Menu:
(a) LED Test Pattern
(b) Ethernet Ports Test
(c) Modem Signal Test
(d) USB Port Test
(g) Factory Information Read
(z) Return to Main Menu
Figure 88: Final Test Menu
Main Menu (<?/CR> for options): d
Active Routing Table:
Entry Destination Network Gateway Address
Subnet Mask
Main Menu (<?/CR> for options):
Figure 89: Active Routing Table display
Time of Reset : THU JAN 01 05:47:35 1970
Asserted at : t=tInterface ../../../source/sd/cim.c#1918:
Reset Type : Valid Software Reset
Reset Reason : Manual reboot via Install Console rr command
Figure 90: Reset history