Juniper Networks G10 CMTS Network Card User Manual


 
Connect the Power and Perform Initial Configuration
Perform Initial Software Configuration
129
7. Configure the IP address of a backup router, which is used only while the routing
protocol is not running.
[edit]
root@# set system backup-router address
8. Configure the IP address of a DNS server.
[edit]
root@# set system name-server address
9. Set the root authentication password by entering either a clear-text password, an
encrypted password, or an ssh public key string (DSA or RSA).
[edit]
root@# set system root-authentication plain-text-password
New password: password
Retype new password: password
or
[edit]
root@# set system root-authentication encrypted-password encrypted-password
or
[edit]
root@# set system root-authentication ssh-dsa public-key
or
[edit]
root@# set system root-authentication ssh-rsa public-key
10. Optionally, display the configuration to verify that it is correct.
[edit]
root@# show
system {
host-name host-name;
domain-name domain-name;
backup-router address;
root-authentication {
authentication-method (password | public-key);
}
name-server {
address;
}
}
interfaces {
fxp0 {
unit 0 {
family inet {
address address/prefix-length;
}
}
}
}
11. Commit the configuration. This activates the configuration on the CMTS.
[edit]
root@# commit