Filter
Top Products
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
About This Manual
xv
Documentation Conventions
Documentation Conventions
This manual uses the following text conventions:
! CMTS and CMTS component labels are shown in a sans serif font. In the following
example, ETHERNET is the label for the Ethernet management port on the CMTS:
The 10/100-Mbps Ethernet RJ-45 connector is used for out-of-band management of
the CMTS and is labeled ETHERNET.
! Statements, commands, filenames, directory names, IP addresses, and configuration
hierarchy levels are shown in a sans serif font. In the following example, stub is a
statement name and [edit protocols ospf area area-id] is a configuration hierarchy level:
To configure a stub area, include the stub statement at the [edit protocols ospf area
area-id] hierarchy level.
! In examples, text that you type literally is shown in bold. In the following example, you
type the words show chassis hardware:
For example, you can use the following command to get information about the
source of an alarm condition:
user@host> show chassis hardware
Notes, Cautions, and Warnings
Notes, cautions, and warnings are denoted by the following symbols:
A note indicates information that might be helpful in a
particular situation or that might otherwise be overlooked.
A caution indicates a situation that requires careful
attention. Failure to observe a cautionary note could result
in minor injury or discomfort to yourself, or serious
damage to the CMTS.
A warning indicates a potentially dangerous situation.
Failure to follow the guidelines in a warning could result in
severe injury or death.