Juniper Networks G10 CMTS Network Card User Manual


 
Troubleshooting
Features for Troubleshooting
145
Local Event Log
The local event log of the CMTS corresponds to the docsDevEventTable within the
DOCS-CABLE-DEVICE-MIB (RFC 2669). This log can assist you with troubleshooting various
issues. The OSSI specification defines required events that a CMTS must support. In addition,
the G10 CMTS supports vendor-specific events.
To view the log, issue the show log cable command. Table 46 provides the correspondence
between the display output fields and the DOCS-CABLE-DEVICE-MIB objects.
user@host> show log cable
Time shown as : YYYY:MM:DD:HH:MM:SS:DS
Index Date/Time Level Id Description
----- ---------------------- ----------- ---------- ----------------------
5 2003:04:16:11:55:37:07 information 2539850802 FLAPLIST CM aged/cleared out
of flaplist on interface cable:2/0,CM MAC:00:00:39:A1:8A:4F,Upstream
Ch:1,Upstream Port:0
4 2003:04:15:10:54:51:03 notice 2539850801 FLAPLIST CM added to
flaplist on interface cable:2/0,CM MAC:00:00:39:A1:8A:4F,Upstream Ch:1,Upstream
Port:0,Condition:IRng
3 2003:04:15:10:54:31:05 information 2539850204 CHASSIS Module at slot 2
went online
2 2003:04:15:10:54:10:00 information 2539850204 CHASSIS Module at slot 5
went online
Table 46: Local Event Log Headings Displayed
See the DOCSIS OSSI specification and the DOCS-CABLE-DEVICE-MIB for more information
about the docsDevEventTable. See the JUNOSg Software Configuration Guide: Interfaces, Cable,
Policy, and Routing and Routing Protocols for more information about event management.
Output Field
DOCS-CABLE-DEVICE-MIB
Object Meaning
Index docsDevEvIndex Relative ordering in the event log.
Date/Time docsDevEvFirstTime The time the entry was created.
Level docsDevEvLevel The priority level of the event.
Id docsDevEvId Unique identifier used by the CMTS for the event type.
Description docsDevEvText A text description of the docsDevEvId.