Filter
Top Products
52
Menu Operations
DLA-G150CLE / LCT1124-001A / ENGLISH
Changing the Image Gamma/Aspect Ratio (Video Menu Mode Only)
The image Gamma (Down, Cinema or Up) and the aspect ratio (4:3 or 16:9) are selectable in Video menu mode.
1
Press the MENU button.
The main menu appears on the screen.
2
Select “Set up” with the cursor button 5
55
5 or ∞
∞∞
∞, and press 3
33
3 or the ENTER button.
The “Set up 1” submenu appears on the screen.
Video submenu
3
Select “Gamma” or “Aspect ratio” with the cursor button 5
55
5 or ∞
∞∞
∞.
4
Adjust the image tone or aspect ratio with the cursor 2
22
2 or 3
33
3.
*To adjust multiple items, repeat 3 and 4.
* : Factory set value
5
Press the EXIT button to return to the previous menu or press the MENU button to
exit the menu mode.
Adjustment item Button Adjustment content
Gamma 2 or 3
The image Gamma projected on the screen can be changed.
Down : Suitable for projecting the video programs.
Cinema* : Normally use in this mode.
Up : Suitable for projecting the cinema programs.
Aspect ratio 2 or 3
Sets the vertical-to-horizontal ratio (4:3 or 16:9) of the video image projected.
“4:3*” : The aspect ratio of the projected image becomes 4:3. Set it to 4:3 for video
of NTSC, NTSC4.43, PAL, SECAM.
“16:9” : The aspect ratio of projected image becomes 16:9. Set it to 16:9 for Hi-
Vision devices (W-VHS VCR, etc.).
Set up 1
Position
Gamma
Aspect ratio
Decoder
Page 2
ENTER
ENTER
ENTER
Cinema
4:3
Down Up
16:9
Decoder is only displayed when there is a signal for the Video IN terminal.
DLA-G150CLU&CLE_Eng.book Page 52 Thursday, February 21, 2002 5:45 PM